The BC1-2 Drill Carrier is powered by two pneumatic traction motors. Skid steering allows the unit to turn within a diameter equal to its short wheel base.
The traverse allows the drill table to be dumped from 45° to vertical using two hydraulic cylinders. The drill is moved along the traverse by a feed screw.
PHQ supply the BC1-2 drill carrier with following drill, feed, centralizer and remote-control assemblies mounted:
| ITEM | NORMAL SPECIFICATION |
|---|---|
| Overall Length | 91 inches |
| Overall Height | 32 in |
| Overall Width | 62 in |
| Total Weight | 3800 lbs |
| Drill Traverse Wdth | 89 in |
| Front Section Lgth | 30.5 in |
| Back Section Lgth | 45.5 in |
| Tramming Speed | 1 km/hr |
| Cylinder Extension | 12 in |
| Traction Motors | Denver MEHT |
| Motor Power | 5.8 hp |
| Pump Motor | Fenner V8 |
| Hydraulic Pump | Vickers V10 |
