Joy SAL67MIC Stoper Drills

These reliable hand held drills are the rock drills of preference for the great Sudbury mining camp of Canada. These reliable hand held drills are the rock drills of preference for the great Sudbury mining camp of Canada.

The drills are used extensively by INCO Limited and Falconbridge Ltd. in their underground mining operations. The drills are used extensively by INCO Limited and Falconbridge Ltd. in their underground mining operations.

New, used and reconditioned drills available – see our reconditioned equipment page New, used and reconditioned drills available – see our reconditioned equipment page

Key Benefits:

  • Stainless steel integral muffler
  • Cap nuts reduce corrosion
  • Tool steel chuck inserts
  • Optimal chuck sizes and styles
  • High strength side rods
  • Efficient three piece valve chest
  • High quality steel in internal parts
SAL67MIC



Continuous front end air blowing prevents cuttings and sludge from entering the drill fronthead. Air flow delivers lubrication to the front of the drill, saves wear of chuck insert, chuck and piston.

drill_joy_feature_muffler

Joy drills provide higher torque for roof bolting requirements Heavy duty control handle has control knob to adjust leg pressure. Bleed button allows stoper to drop quickly after the hole is completed. Exclusive flap design reduces muffler back pressure Heavy duty backhead has rugged air and water hose connection threads. Optional water regulating valve for conditions of high water pressure.

drill_joy_feature_chuck

Piston rod is made from stainless steel for longer life. Exclusive patented packing and rod wipers provide exceptionally long life. Prevent scoring cylinders and piston if the leg is dented. Stop noise transmission, acts as a buffer, to reduce shock on parts. End cap welded to rod

SAL60M Muffled Stoper & AL60M Muffled Jackleg Drills

ITEM SAL67M Stoper AL67M Long Tom AL67MIC Quarry
Feed Leg 31″ Stroke 787mm 48″ x 3″ Stainless 1219mm x 76mm mounted on feed
Rotation 1 in 30 Upstroke 1 in 30 Upstroke 1 in 30 Upstroke
Cylinder Bore 3 1/4″ 82.5mm 3 1/4″ 82.5mm 3 1/4″ 82.5mm
Cylinder Stroke 2 1/2″ 63.5mm 2 1/2″ 63.5mm 2 1/2″ 63.5mm
Chuck Size 7/8″ hex 4 1/4″ 7/8″ hex 4 1/4″ 7/8″ hex 4 1/4″
Feed Leg Weight Included 30 lb 13.5 kg N/A
Mach. Weight 101 lb 45.7kg 101 lb 45.7kg 95 lb 45.7kg
Air Consumption 200 cfm @ 90 psi 5.66 cu m/m 228 cfm @ 90 psi 6.46 cu m/m 228 cfm @ 90 psi 6.46 cu m/m

Required: Adobe Acrobat Reader