PHQ36 IR Rock Drill

This dependable, powerful pneumatic production rock drill designed and proven in high production long-hole drilling in underground mining. For deep hole drilling undergound and surface quarries. Our machines proven in over 3,000,000 of drilling.

The PHQ36IR delivers fast penetration in hard rock drilling hole diameters from 38mm to 75mm diameter (1.5 inch to 3 inche) to depths of 50 meters (150 feet). Test Results Drilling Speed.

The drill is capable of drilling larger diameter holes to greater depths and has been used to drill holes up to 100mm diameter (4 inch) to depths of 90 meters (300 feet) Manufactured in Canada.

The PHQ36-IR drill is used in a wide range of applications mounted on drill jumbos in underground hard rock mines and track mounted units for surface quarry and construction drilling. PHQ36IR



  • Rugged heavy duty feed assembly for PHQ36 Drills
  • Heavy duty section light-weight aluminum feed rails
  • Powerful gear type air motor (available as tandem motor)
  • Precision machined and case hardened steel feed screw
  • Durable special grade nylon bumper-wear plates
  • Reliable powerful feed and pulling performance
  • Remote control air connections
  • Available in four foot and six foot steel change
  • Parts interchangeable with Seco MKV Feeds

leg leg

ITEM SPECIFICATION
Rotation at drill steel Gear Type 40kW @120rpm at 500kPa
Rotation Torque 240 ft lbs @ 75 psi 320 NM @ 500kPa
Cylinder Bore 4.49 inches 114 mm
Cylinder Stroke 3.39 inches 86 mm
Frequency 27 Hz @ 500kPa
Weight 265 lbs 120 kg

Specifications – PHQ36 Independent Rotation Drill

LARGER MATING FACES ON MAJOR COMPONENTS FOR LONGER LIFE ADAPTER BOLT ON END CAP AVAILABLE FOR FAST SHANK CHANGES ALL PARTS ARE INTERCHANGEABLE IN EXISTING S36-IR DRILL FLEETS MADE IN CANADA TO SPECIFICATIONS USING HIGH QUALITY TOOL STEEL FULL RANGE OF REPLACEMENT PARTS FOR PHQ36-IR DRILLS IN STOCK

ITEM SPECIFICATION
Shank Size 1¾ inch 4 splines 44 mm 4 splines
Air Consumption 450 cfm @ 100 psi 212 L/sec @ 7 bar
Hole Depth Capacity Feed Mounted 1.375 to 3.5 in to 150 feet 35 to 89 mm to 50 meters Ream to 5 inch (130mm) to full depth of pilot hole.
Water Requirements 10 gpm @ 70 psi 37 L/sec @ 5 bar
Air and Water Connection Sizes Percussion – 1 ½ inch BSP Rotation Motor – 1 inch BSP Water – ¾ inch BSP
Air and Water Hose Sizes Percussion – 1 ½ inch – 38mm Rotation Motor -1 inch – 25mm Water – ¾ inch – 20mm

PHQ36 cylinders and intermediate housing are made from high density steel castings.

PHQ36 drill cylinders are machined to fine tolerances and heat treated to provide maximum performance. The components are tested in mine production drilling and proven reliable.

Parts HeadQuarters Inc., is now assembling complete PHQ36 Independent Rotation Drills in Burlington Ontario, ready to ship from stock.

Try one of our PHQ36-IR Drills to see the many innovations incorporated into this new Long-Hole Drill.

leg

leg LARGER MATING FACES ON MAJOR COMPONENTS FOR LONGER LIFE ADAPTER BOLT ON END CAP AVAILABLE FOR FAST SHANK CHANGES ALL PARTS ARE INTERCHANGEABLE IN EXISTING S36-IR DRILL FLEETS MADE IN CANADA TO SPECIFICATIONS USING HIGH QUALITY TOOL STEEL FULL RANGE OF REPLACEMENT PARTS FOR PHQ36-IR DRILLS IN STOCK

leg

leg